Chanel Type Compression Testing Machine _Single Gauge _Electrical cum Hand Operated ( 1000/1500/2000KN )

1000KN Compresion Testing Machine Hand Operated & Electric cum Hand Operated

Specification Electric cum Hand Operated Single Gauge Electric cum Hand Operated Single Gauge
Capacity 2000KN 1500KN
Frame Construction MS Plate Channel Type MS Plate Channel Type
Ram Dia 205mm 182mm
Sample test 50, 100,150 & 200mm 50, 100, & 150mm
Hydraulic Pump Mico + Hand Pump Mico + Hand Pump
Pressure Gauge 8” 8”
Control Panel Motorized Motorized
Platen Size 220X220mm 7”X7”
Vertical Clearance 315mm 315mm
Hoses MS MS
Weight 600kg with Pack 400kg with Pack
Accuracy Dial Gauge 10KN Dial Gauge 10KN
Horizontal Clearance 300mm 300mm



1500KN/ 2000KN Chanel Type Compression Testing Machine

(Electrically Operated) Single Dial Gauge


It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height. The machine meets the essential requirements of various Indian, British & American standards for compression tests.
Loading Unit : The hydraulic Jack of 2000/1500 kN capacity is fixed to base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen.
Pumping Unit : The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability. The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is also equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are also incorporated in the pumping unit so that in the case of break-down of power supply, the motor will stop and would not-re-start unless starting switch is operated.


There are no reviews yet.

Be the first to review “Chanel Type Compression Testing Machine _Single Gauge _Electrical cum Hand Operated ( 1000/1500/2000KN )”

Your email address will not be published.