Vibrating Table

The Vibrating Table produces better concrete Moulds and cylinders by removing entrapped air. It distribute concrete evenly inside the moulds and nearly eliminate the problems of bug holes and air bubbles.

Max Weight

0-200 Kg

Application

Industrial

Size

75cm x 75cm

Vibrations

3000 to 6000 cycle/sec

Description

The Vibrating table is entirely constructed of thick steel. The table top is made of thick mild steel plate and has stops along its edges to prevent moulds from walking off the table during operation. A cross arm adjustable on a vertical rod at the centre of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the variation of frequency. A speed regulation handle is provided for increasing or decreasing the frequency. The vibrator is mounted on cushioned steel vibrating deck. A switch is provided for starting the motor. Operation on 440 V, three phase, A.C. supply.

SPECIFICATION:

  • Design based on the IS:2514-1963
  • The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. And has stops along its edges to prevent moulds from walking off the table during vibration.
  • Frequency of viabration-3000 to 6000 cycle/sec
Size in m Capacity in tones
1×1 m 0.25 to 1 tones
2×2 m 0.5 to 1 tones
3×3 m 1.5 tones

Reviews

There are no reviews yet.

Be the first to review “Vibrating Table”

Your email address will not be published. Required fields are marked *