Skip to content
-
-
-
- The Centrifuge Extractors are used for determination of bitumen percentage in hot mixed paving mixtures and pavement samples. The mix is added with a solvent and dissolved bitumen is removed by centrifugal action. The Extractors are available in two versions, Hand operated and motorized electrically driven.
- Read more
-
-
-
- It may be defined as the hardness softness of the bitumen by measuring the depth in tenth of a millimeter to which standard loaded needle will penetrate vertically in five minutes the penetration of bituminous material is the distance in tenth of a millimetre that a standard needle will penetrate vertically into a sample of the material under standard conditions…
- Read more
-
-
-
- It is used to determine viscosity of Fuels, Oils & Lubricants & Petrochem Raw Material at constant temperature.
- Read more
-
-
-
-
- This method is used for determining the ductility of bituminous materials by measuring the elongation before breaking when two ends of a briquette specimen are pulled apart at a speed of 50mm/min + 2.5mm/min at temperature of 270C + 0.50C.
- Read more
-
-
-
-
- This is widely used for determination for closed cup Flash Point of Fuel Oil, cut back asphalts, other viscous material and suspension of solids having a flash point above 490C (1200F).
- Read more
-
-
-
- This apparatus is used to determine loss on heating of asphaltic bitumen.
- Read more
-
-
-
- The test is applicable to hot mix designs using bitumen and aggregates up to a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bitumenous mixture is measured when the same is loaded at periphery at 5 cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The…
- Read more
-
-
-
- This apparatus is meant for determination of softening point of bituminous materials. Softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. The apparatus consists of Glass beaker of heat resistant glass having internal diameter of 8.5 cm X 12…
- Read more
-
-
-
- Viscosity is the property of the fluid by which it resist flow due to internal friction. Used for determining viscosity of cut - back bitumen and road oil. Viscosity is measured by determining the time taken by 50 cc of the material to flow from a cup through a specified orifice.
- Read more